Products

Give a good granularity of angles for a tool to approach from (good in tight spots). More (and smaller) corners would be vulnerable to being rounded off.

The performance of the forged products are better than casting products.
General material is1045, zinc plated finish, T thread, we could do as your request.

A square nut is a four-sided nut. Square nuts are typically mated with square-headed bolts. Square nuts are used along with flat washers in order to avoid damage from its sharp edges and helps to...

Square nuts can have standard, fine or coarse threading with platings of zinc yellow, plain, zinc clear, tin and cadmium, among others. Most can meet either the ASTM A194, ASTM A563, or ASTM F594...

​Square nuts originally designed to go with square head bolts, they have generally been replaced by the cheaper hexagon nut or the square pressed nut.

The steel square nuts are forged.
Its normal material 1045 and black finish, or as your request.
Steel square nuts are widely used in the mining ground support, tunneling ground...

Square nuts are mainly used in the fields of mining, manufacturing hardware, electric appliance, automobile, machine and steel structure buildings. They are mainly used as rock bolt accessories.

Square nut is a four-sided nut. Compared to standard hex nuts, square nuts have agreater surface in contact with the part being fastened, and therefore provide greater resistance to loosening...

Square nuts originally designed to go with square head bolts, they have generally been replaced by the cheaper hexagon nut or the square pressed nut.

A square nut is a four-sided nut. Square nuts are typically mated with square-headed bolts. Square nuts are used along with flat washers in order to avoid damage from its sharp edges and helps to...

A square nut is a four-sided nut. Square nuts are typically mated with square-headed bolts. Square nuts are used along with flat washers in order to avoid damage from its sharp edges and helps to...

A square steel nut is a four-sided nut. Square nuts are typically mated with square-headed bolts. Square steel nuts are used along with flat washers in order to avoid damage from its sharp edges...